PARKER微型氣動電磁閥維護注意事項
Belonging to the actuator, and pneumatic solenoid valve is one of them,
by controlling the movement of the valve to stalls or leakage of different drainage holes,
And the oil hole is often open, the hydraulic oil will enter a different drain pipe,
And then through the pneumatic solenoid valve oil pressure to promote the piston cylinder,
This controls the mechanical movement of the solenoid valve by controlling the current of the electromagnet of the pneumatic solenoid valve.
而進油孔是常開的，液壓油就會進入不同的排油管，
然后通過氣動電磁閥的油的壓力來推動油剛的活塞，
這樣通過控制氣動電磁閥的電磁鐵的電流就控制了整個電磁閥的機械運動。
Both sides are two electromagnets, which side of the magnet coil valve body will be attracted to which side;

PARKER微型氣動電磁閥維護注意事項
Pneumatic solenoid valve by controlling the movement of the valve to stalls or leakage of different drainage holes,
And the oil hole is often open, the hydraulic oil will enter a different drain pipe,
氣動電磁閥里有密閉的腔，在的不同位置開有通孔，
氣動電磁閥的每個孔都通向不同的油管，腔中間是閥，
兩面是兩塊電磁鐵，哪面的磁鐵線圈通電閥體就會被吸引到哪邊；
氣動電磁閥通過控制閥體的移動來檔住或漏出不同的排油的孔，
Pneumatic solenoid valve in a closed cavity, in different locations open through the hole,
Each hole of the pneumatic solenoid valve leads to a different tubing, the middle of which is the valve,
電磁閥是用電磁控制的工業設備，是用來控制流體的自動化基礎元件，
屬于執行器，而氣動電磁閥是其中的種，是通過控制閥體的移動來檔住或漏出不同的排油的孔，
而進油孔是常開的，液壓油就會進入不同的排油管，
然后通過氣動電磁閥的油的壓力來推動油缸的活塞，
這樣通過控制氣動電磁閥的電磁鐵的電流就控制了整個電磁閥的機械運動。
And then through the pneumatic solenoid valve oil pressure to push the oil just the piston,
This controls the mechanical movement of the solenoid valve by controlling the current of